AEMAM Semester 2 Exam Cheatsheet
Maths Methods Semester 2 COMPLETE STUDY GUIDE (Units 1&2 – A-Grade Sheet)
Read this once. It is everything that appears in every Sem 2 WA paper (WAEP 2018, CCGS 2019, RSHS 2021 analysed). Red = traps.
Exam Structure (same every year)
- Section One (Calculator-free): 8 questions, 52 marks, 35%, 50 min. Short answer; no calculator of any kind. Exact values, simple proofs, sketching, symbol-pushing.
- Section Two (Calculator-assumed): 13 questions (Q9–Q21), 98 marks, 65%, 100 min (after 10 min reading). Same types but with nasty numbers — set everything up, then let the calculator finish. Formula sheet retained from Section One.
- Marks are mostly 1–4 each; Section Two has the long apply-to-context questions (models, word problems, optimisation, probability tables). Calculator is only worth ~5% of marks — set-up and theory still earn almost everything; never skip showing the equation you solved.
Golden Equations (write these on your formula sheet – Unit 1&2 Sem 2)
Sequences: AP: , . GP: , , infinite sum only if . Exponential/log: , , , , . ; ; ; ; ; change of base . Exponential eqn: . Circle measure: (radians); sector , arc ; segment area = sector − triangle — the formula sheet gives sector only, you subtract the triangle yourself for segments. Rates (difference quotient): = average rate over ; instantaneous rate . Derivatives: ; ; sum rule; (chain rule result). . First principles: . Optimisation recipe: “draw the diagram → express the quantity to maximise/minimise in one variable → differentiate → set → solve → test (sign of either side or endpoints) → answer with units.” Trig model: or : amplitude , period (radians), centre/mean line , max , min . Phase: goes through max at → cosine; through mean then up → sine.
1. Sequences (every paper)
Arithmetic (AP)
- ; . Given two terms, solve simultaneously for and .
- Find d from any two terms: difference ÷ gap in positions (e.g. ).
Geometric (GP)
- ; . Given two terms and an index, divide one equation by the other to eliminate , solve for first.
- Infinite sum: valid only if . If the sum does not exist — say “diverges / no finite sum”.
- RED TRAP (CCGS19 Q13): quadratic in gives two values (e.g. or ). The finite- condition selects ; you lose marks by reporting the other root. Always check which actually fits the situation.
- “Grows by per unit” → ; “decays by ” → .
Word problems (WAEP18 Q9×, RSHS21 Q13 aeroplane)
- Identify AP or GP and write and / from the first two pieces of data.
- Show the explicit model: or .
- Answer the specific index / cumulative question — read whether it asks single term () or cumulative ().
- Check the unit (metres, mL, people) and a sensible range.
2. Functions & Relations (Section One heavy)
- Relation vs function: a function has exactly one for each — every vertical line cuts the graph at most once.
- Domain/range: state the natural domain ( for , under a square root, all reals for linear/quadratic) and the matching range. Say them from the graph, not from memory for circles/parabolas.
- Transformations: — vertical stretch/reflection, horizontal stretch/, shift right, shift up. Reflections: across x-axis, across y-axis.
- Inverse notation: swaps x and y and reflects in ; not .
- Distance/midpoint: , . Gradients of perpendicular lines multiply to .
- Circle: centre , . Tangent at a point is perpendicular to the radius to that point.
3. Trigonometry & Circle Measure (every paper)
Radians + exact values
- ; convert by or . RED TRAP: leave answers in radians when the question says so — radian mode on the calculator.
Exact-value table (learn it – Section One guarantees it):
| — |
- Unit circle: , . Quadrants (CAST): 1st all , 2nd , 3rd , 4th . Sign of a trig value decides which quadrant solutions live in.
- Reference-angle method for equations: solve in by finding the acute reference angle then placing it in the quadrants where the function is positive/negative as required.
- Identities: ; ; period of sin/cos , tan .
Sectors & segments
- Area of sector , arc — in radians.
- Segment area (sector minus isosceles triangle). The triangle is always regardless of how big is.
- RED TRAP: must be the radius of the sector, not a side given elsewhere; and angle mode must be radians when using .
4. Exponential Growth & Decay (WAEP9/11, CCGS15)
- General form or . Write the model first, then substitute the point(s).
- Typical: — after which time does halve/reach a target? → set expression = target, take logs, solve.
- % change per unit: “gets 6% smaller each period” → base (i.e. ); “increases by ” → base . RED TRAP: the base is NOT the percentage — “decays by 6%” means multiply by 0.94, not 0.06.
- Half-life/
finding t: take of both sides; require at least 2 correct decimal places and give units. - Reading rate from a word problem (CCGS15): identify the starting value (, when ), the final value, and how the quantity changes per unit time → write then solve for with one known point.
5. Probability: Two-Way Tables (every paper — biggest Section Two block)
Structure
A two-way table classifies by two attributes (e.g. Android vs iPhone × battery life). Fill the row totals, column totals and grand total FIRST — most cells are found by subtraction.
Conditioning (the whole game)
- — denominator is the row/column total you were given the condition on. If asked “…given that it has a long battery” then denominator = battery column total, not the grand total.
- at the intersection cell (top-left style). .
- Complement: ; .
Independence (definition marks)
- Independent: . Equivalent check: .
- Mutually exclusive: (can’t both happen) — different from independent; independent events can overlap.
- RED TRAP: “independent” and “mutually exclusive” are not synonyms. Write both definitions if a question asks one.
- Given , (or other region) as unknowns → build a full table/region diagram with a letter for the missing cell, solve.
Geometric distribution (CCGS19 Q20)
- Repeated independent trials, probability of success each trial.
- where . RED TRAP: the formula has , not — count the failures BEFORE, not after.
- “At most attempts” → sum geometric terms or .
6. Combinatorics (WAEP16, RSHS18)
- — unordered selections; — ordered arrangements. RED TRAP: wording — “arrangements/orders” = (order matters), “groups/choose/committee” = .
- Probability numerator = favourable arrangements (choose the wanted group) × any remaining picks; denominator = total arrangements.
- “At least one” → . Separate “at least 2 of a kind” → count directly or complement up to it.
- Small numbers: list carefully instead of formulas for marks in method anyway.
7. Circle/Hyperbola/Linear Intersections + Discriminant (RSHS19, CCGS12)
- Intersect two curves: solve simultaneously (substitute ). The number of solutions is decided by the discriminant :
- → two distinct solutions (secant/intersects twice), → tangent (touches once), → no real intersection.
- Tangency condition = . Example: line tangent to hyperbola → substitute, multiply through, set discriminant , solve for and the contact point.
- Hyperbola : vertical asymptote , horizontal asymptote .
- Sign of decides “touches / cuts / misses” — answer literally using one of those three words.
8. Difference Quotient & Rate of Change (CCGS14, RSHS15)
- Average rate of change of on — slope of the secant.
- Instantaneous rate at .
- Typical calc-assumed task: table with available → compute directly = IROC approximation. gives an even better approximation — smaller = closer to the true IROC.
- Units of a rate always “quantity per time” (e.g. m/s, people/year).
- RED TRAP: on the calculator, brackets matter: , and for instantaneous use the smaller you’re given.
9. Differentiation (both sections)
First principles (usually Section One)
- . Expand, cancel the in the denominator, then let .
- RED TRAP: you must cancel a factor of — substituting into the pre-cancelled quotient gives and earns nothing.
Rules (Section Two)
- Power rule , constant multiple, sum/difference. .
- Chain (linear function): — don’t forget the extra factor from the inner derivative (e.g. ).
- For expressions like / → rewrite with negative/fractional powers first, then differentiate term by term.
- Tangent: at the point; equation or with the point subbed in.
- Normal: gradient .
- at stationary points → solve, substitute into . Nature by sign test of around the point (or second derivative).
- → local minimum; → local maximum; / change test → check both sides, might be a horizontal point of inflection (stationary point of inflection) where sign of does NOT change.
Sketching polynomials
- -intercept (), -intercepts (factor), stationary points + nature, end behaviour from the leading term (degree + sign).
- Cubic with factorable (e.g. ) → stationary points at both roots; at a double root of the sign doesn’t change → stationary point of inflection, not a turning point.
10. Optimisation (every paper — the full-marks word question)
Give all 5 steps for full marks:
- Define variable(s); draw the diagram and label.
- Write the quantity to maximise/minimise in terms of one variable (eliminate the other using the constraint, e.g. cone volume from substituted from a similar-triangles ratio).
- Differentiate; set ; solve (calculator for solving).
- Test for maximum vs minimum (sign of derivative either side, or second derivative, or endpoints of the domain). State which.
- Answer the question with units (cm³, m²); if asked, give the optimal too and verify it’s in the domain.
- RED TRAP: most optimisation marks are in setup + testing + units, not the algebra. Never stop at “found ”. Domain must be stated (e.g. if width can’t be negative or exceed material).
- Common solids that appear: cylinder in a cone, box from a sheet, rectangle with a given perimeter/area.
11. Trigonometric Models (WAEP18 Ferris wheel, RSHS20 springs)
Given a height model like :
- Amplitude = distance from the centre-line to max/min; period ; centre-line (mid-height).
- Max , min . First reaches a given height: solve , take the correct branch (rising vs falling branch of cosine).
- “First time at a height while rising” vs while falling → choose the appropriate solution from the unit circle (rising = the solution after the minimum, falling = the one before/after maximum). Diagram always helps.
- Ferris wheel: → amplitude 6.5, period 50 s, min height 1.5 m, max 14.5 m.
- Multiple springs , , : compare amplitude (height range), period (frequency), and max for “which spring hangs highest”. “First reaches maximum” = solve where the trig argument (cos) or (sin) — includes the leading coefficient sign.
12. Probability: Rules + Applications (Section One)
- . Venn: union is the whole shaded shape; intersection the overlap.
- ; .
- Conditional probability from a small table or given numbers: identify the reduction of the sample space first, then divide.
- “Of the people who have the virus, what fraction test positive” type questions → reverse conditional, build a tree/table with a total of 1, then .
- Independent: multiply. Not independent: must use conditional — don’t multiply.
- Give probabilities as decimals/fractions, check , and state the answer rounded as the paper requests (often 3 dp).
13. Rectilinear Motion + Antidifferentiation (Unit 2 tail)
- Displacement → velocity ; acceleration . Reverse: antidifferentiate to go down the chain.
- → turning point of motion (instantly at rest). Positive = moving forward/up; negative = moving backward/down.
- Antidifferentiate: ; add the constant and find it from an initial condition.
- General solution at a given time, then use at (or a stated position) to fix — otherwise the graph is wrong.
- RED TRAP: “find displacement after seconds” sometimes wants net displacement () and sometimes total distance — calculate both, read which is asked.
Extended-Answer Scenarios (the 5 shapes that repeat)
- A word problem → an exponential/geometric model. Write model → answer two numeric parts (given a value find the time, or given time find value) → then one interpretation sentence (“this is the amount remaining when…”). Read off answers rounded to 3 dp with units.
- Optimisation with a real container/field: full 5-step recipe above. Setup in one variable is worth the most marks.
- Trigonometric model (wheel/swinging weight): write amplitude/period/max/min; solve “first time the object is above a height”; sketch one cycle with labelled intercepts/max/min.
- Two-way table + conditioning/probability: fill the table, answer 3–4 probability questions, then an independence/conditional “is equal to ?” verification — conclude with “…therefore the events are independent” only if both values agree.
- Line tangent to a curve (hyperbola/parabola): substitute, discriminant, tangency , find the tangent equation / no-tangency range for .
Marking hints: 1 mark = correct model/equation written; 1 mark = solving done (calculator accepted); 1 mark = the answer stated with correct units; context sentences earn the last mark in “interpret” questions — always write one complete sentence.
Final Checklist Before the Test
- Sequences: AP , GP ; only if ; use the -value that survives the test.
- Exponent rules: negatives to reciprocals, fractional = root, log power-move-down, change of base in a calculator.
- Exact trig values & radians: segment = sector − triangle; in radians for .
- Two-way tables: fill totals first; conditional denominator = the row/column total of the given; independent ⇔ .
- Counting: “order matters” → ; “choose/groups” → ; “at least one” → .
- Difference quotient: average over an interval uses the interval width; instantaneous uses the smallest ; brackets on the calculator.
- Differentiation: power rule + chain − always keep the inner-derivative factor; tangent vs normal gradients are negative reciprocals; double root of = stationary point of inflection (sign doesn’t change).
- Optimisation: define → one variable → → test nature → answer with units and domain.
- Trig models: amplitude , period , centre ; “rising vs falling” branch matters for first-time heights.
- Discriminant: two intersections, tangent, none — answer in those words.
- Motion/antidiff: always and fix it; net displacement vs total distance is a real question you must notice.
- Section One is a no-calculator marathon: exact surds, first-principles limits, exact trig, and the definitions above are your marks. Section Two: set up, let the calculator solve, write units.